1 为什么这个配方重要
缝合铁板替代配方可以说是《幸福工厂》中最具影响力的早期配方解锁,影响力仅次于默认加固铁板配方需要6铁板和12螺丝在组装器中生产1个加固铁板。生产12螺丝需要铁杆构造器供应螺丝构造器,而铁杆构造器又需要熔炼炉的铁锭。完整的默认链条是:铁矿石→熔炼炉→铁锭→构造器(铁板)=6铁板。并且:铁矿石→熔炼炉→铁锭→构造器(铁杆)→构造器(螺丝)=12螺丝。然后两者都进入组装器。仅仅为了一个加固铁板的螺丝部分就需要4台机器。
缝合铁板配方彻底改变了这一切。它需要6铁板和15线生产2个加固铁板。线由铜锭在构造器中直接制作——没有铁杆步骤,没有螺丝步骤。完整链条变成:铁矿石→熔炼炉→铁锭→构造器(铁板)=6铁板。并且:铜矿石→熔炼炉→铜锭→构造器(线)=15线。两者进入组装器生产2个加固铁板。你完全消除了铁杆构造器和螺丝构造器,同时产量翻倍。
何时解锁
一旦达到T1并解锁MAM,你就应该优先解锁缝合铁板。像最佳时机是在T2解锁组装器后立刻。在T2之前你根本无法制作加固铁板(需要组装器),所以不着急。但当你放下第一个组装器的那一刻,你制作的每个加固铁板都应该使用缝合配方。节约会快速累积:到T3阶段,你已经制作了数百个加固铁板,缝合配方为你节约了数千个螺丝和数十个机器小时。
2 配方详情
输入/输出比例(每台组装器)
| 配方 | 建筑 | Input 1 | Input 2 | 输出 | 周期时间 |
|---|---|---|---|---|---|
| 缝合铁板 (Alternate) | 组装器 | 6 Iron Plate/min | 15 Wire/min | 2 Reinforced Iron Plate/min | 24s |
| Reinforced Iron Plate (Default) | 组装器 | 6 Iron Plate/min | 12 Screw/min | 1 Reinforced Iron Plate/min | 12s |
每加固铁板成本对比
| 指标 | 默认配方 | 缝合铁板 | 提升 |
|---|---|---|---|
| Iron Plate per Plate | 6.0 | 3.0 | -50% |
| Screws per Plate | 12.0 | 0 | Eliminated |
| Wire per Plate | 0 | 7.5 | New (from Copper) |
| Production per Assembler | 5 /min | 5 /min | — |
| Upstream Screw Machines | 2-3 Constructors | 0 | Eliminated |
| Iron Ore per 10 Plates | ~180 (plates + screws) | ~90 (plates only) | -50% |
生产树
90 Iron Ore → Smelters → 90 Iron Ingot
60 Iron Ingot → Constructor (Plate) → 30 Iron Plate
30 Iron Ingot → Constructor (Rod) → 30 Iron Rod
30 Iron Rod → Constructor (Screw) → 30 Screw
30 Plate + 30 Screw → 组装器 → 2.5 Reinforced Plate/min (SLOW)
[STITCHED IRON PLATE — ALTERNATE]
45 Iron Ore → Smelter → 45 Iron Ingot
45 Iron Ingot → Constructor (Plate) → 15 Iron Plate
23 Copper Ore → Smelter → 23 Copper Ingot
23 Copper Ingot → Constructor (Wire) → 30 Wire
15 Plate + 30 Wire → 组装器 → 5 Reinforced Plate/min (2x speed!)
Scaling to 50 Reinforced Iron Plates Per Minute
要产生50加固铁板/分钟,默认配方需要10个组装器、30个铁板构造器、30个铁杆构造器和30个螺丝构造器,消耗600铁矿石/分钟。用缝合铁板配方,只需10个组装器、15个铁板构造器和15个线构造器,消耗300铁矿石和150铜矿石/分钟。机器数量从100台降到40台,铁矿石消耗减半。唯一的“成本”是铜矿石,而铜矿在早期生态区非常丰富。
Comparison with Other Plate Recipes
4 解锁策略
研究站研究要求
缝合铁板的解锁路线非常简单,从游戏一开始就可以达到:
↓ HUB Tier 1: Unlock MAM + Constructor + Smelter
↓ HUB Tier 2: Unlock Assembler
↓ Build MAM
↓ Research Hard Drive from Tier 1-2 Crash Site
↓ Select Stitched Iron Plate from 3 options
前置条件清单
| 要求 | 如何获得 | 预计时间 |
|---|---|---|
| HUB Tier 1 | Deliver 10 Iron Plates + 10 Copper Sheets to HUB | 15-30 minutes |
| HUB Tier 2 | Deliver required parts (includes Reinforced Iron Plates) | 1-2 hours |
| MAM | Craft in Build Gun after Tier 1 | 5 minutes |
| Hard Drive | Loot from any nearby Crash Site | 10-30 minutes |
| Copper Supply | Need copper for Wire production | Already available |
推荐解锁顺序
为了最大化早期效率,我们推荐以下解锁优先级:
- 铸造螺丝 — Immediate screw production boost for ALL items
- 缝合铁板 — Eliminates screw demand for Reinforced Iron Plates
- Iron Wire — Backup wire production when copper is scarce
- 铜合金锭 — Triple copper ingot yield (Tier 3)
- Fused Wire — Triple Wire + Quickwire (Tier 5)
5 注意事项
由于缝合铁板在早期配方池中,而且池相对较小(15-20个配方),存档刷新非常有效。在将第一个硬盘插入MAM之前保存。如果三个选项中没有缝合铁板,就读档重试。只要有耐心,你可以在第一个硬盘就确保获得此配方,从第一个小时就为整个工厂奠定成功的基础。
缝合铁板消除了加固铁板的螺丝需求,但螺丝仍然用于转子、定子、模组框架和许多其他产品。这就是
线是游戏中最简单的产品之一:1铜锭在构造器中变成3线。如果有
不要认为缝合铁板只是早期便利。加固铁板用于Mk.2传送带、传送带升降机、跳跳垫、AWESOME商店和许多装饰物品。即使在T8阶段,你仍然需要建造需要加固铁板的基础设施。有了缝合配方,每个加固铁板都只需要一半的铁和零螺丝。在100+小时的游戏中,累积的节约是惊人的。
6 额外收益
同一硬盘池的其他配方
当你寻找缝合铁板时,会顺便解锁其他几个有价值的早期配方:
🔗 铸造螺丝
⚡ Iron Wire
⚡ Biomass (Wood) & Biomass (Leaves)
⚡ Copper Rotor
地图探索奖励
产出缝合铁板的早期坠机地点位于最安全、最容易到达的生态区。对于新先驱来说,探索回报是丰厚的:
| 额外发现 | 位置 | 价值 |
|---|---|---|
| Pure Iron Node | Grass Fields western ridge | 2x production from a single miner |
| Pure Copper Node | Grass Fields southern valley | Double copper output for Wire production |
| Coal Nodes (x2) | Rocky Desert western entrance | Enables coal power transition (Tier 3) |
| Limestone Node | Rocky Desert entrance | Concrete production for foundations |
| Power Slug (Green) | Near Crash Sites in Grass Fields | 50% overclocking for early miners |
| Caterium Ore Node | Rocky Desert eastern ridge | Quickwire and Fused Wire for Tier 5 |
| Hard Drives (6-8) | Grass Fields + Rocky Desert rim | Complete Tier 1-3 recipe collection |
幸福工厂攻略中的相关配方
缝合铁板是早期效率的基石。以下相关配方形成了完整的优化链:
铸造螺丝
50 screws/min from Iron Ingots. The other essential early-game recipe.
钢制螺丝
260 screws/min from Steel Beams. Late-game screw production solution.
熔合线与快速线
Triple Wire from Copper + Caterium. Supercharges your Wire supply.
重型封装框架
Removes screws from Modular Frames. The Tier 5+ companion to Stitched.